2019 Ford Mustang Lug Nut Torque Specs
Why Lug Nut Torque Matters
Properly torquing the lug nuts on your 2019 Ford Mustang is crucial for the safety and performance of your vehicle. Lug nuts that are not tightened to the correct specifications can lead to wheel vibrations, uneven tire wear, and even the possibility of the wheels coming off while driving. To ensure the longevity of your Mustang and the safety of everyone on the road, it is essential to follow the recommended lug nut torque specifications.
Recommended Torque Specifications
The table below provides the recommended lug nut torque specifications for the 2019 Ford Mustang. These specifications are given in both pound-feet (lb-ft) and Newton-meters (Nm) for your convenience.
| Wheel Size | Lug Nut Torque (lb-ft) | Lug Nut Torque (Nm) |
|---|---|---|
| 17-inch | 100-110 lb-ft | 135-149 Nm |
| 18-inch | 100-110 lb-ft | 135-149 Nm |
| 19-inch | 100-110 lb-ft | 135-149 Nm |
| 20-inch | 100-110 lb-ft | 135-149 Nm |
How to Properly Torque Lug Nuts
To ensure that your lug nuts are torqued correctly, follow these steps:
- Start by parking your Mustang on a flat surface and engaging the parking brake.
- Using a lug wrench or a torque wrench, loosen the lug nuts on the wheel you want to work on. Loosen them in a crisscross pattern to prevent damage to the wheel studs.
- Once the lug nuts are loose, use a jack to lift the vehicle off the ground. Place jack stands under the vehicle for added safety.
- Remove the lug nuts and take off the wheel.
- Clean the wheel hub and the mounting surface to ensure proper contact.
- Place the wheel back onto the hub and hand-tighten the lug nuts in a crisscross pattern.
- Using a torque wrench, tighten the lug nuts to the recommended torque specification for your specific wheel size (refer to the table above).
- After torquing all the lug nuts, double-check the torque by going over each lug nut again in the same crisscross pattern.
- Lower your Mustang back to the ground using the jack and remove the jack stands.
- Finally, give each lug nut a final check to ensure they are all properly torqued.
Conclusion
Properly torquing the lug nuts on your 2019 Ford Mustang is a simple yet essential maintenance task that should not be overlooked. By following the recommended torque specifications and using a torque wrench, you can ensure the safety and performance of your Mustang’s wheels. Remember to always double-check your lug nuts after torquing to guarantee they are tightened to the correct specifications. Stay safe on the road and enjoy the thrilling ride of your 2019 Ford Mustang!