2018 GMC Canyon Lug Nut Torque Specifications
What is Lug Nut Torque?
Lug nut torque refers to the amount of force applied to tighten the lug nuts on a vehicle’s wheels. It is crucial to ensure that lug nuts are properly torqued to prevent wheel damage, vibrations, and potential accidents. In this article, we will provide you with the recommended lug nut torque specifications for the 2018 GMC Canyon.
Lug Nut Torque Specifications Chart
To make it easier for you to find the correct torque specifications, we have compiled a detailed chart below. The torque values are given in pound-feet (lb-ft) and Newton meters (Nm).
| Wheel Size | Lug Nut Torque (lb-ft) | Lug Nut Torque (Nm) |
|---|---|---|
| 16-inch | 100-110 | 136-149 |
| 17-inch | 100-110 | 136-149 |
| 18-inch | 100-110 | 136-149 |
| 20-inch | 100-110 | 136-149 |
Steps to Properly Torque Lug Nuts
To ensure the lug nuts on your 2018 GMC Canyon are torqued correctly, follow these steps:
- Start by parking your vehicle on a flat surface and engaging the parking brake.
- Locate the lug wrench and the jack that came with your vehicle.
- Using the lug wrench, loosen each lug nut on the wheel you want to torque. Do not remove them completely at this stage.
- Position the jack under the vehicle’s designated jacking point and raise the wheel off the ground.
- Remove the loosened lug nuts and take off the wheel.
- Clean the wheel hub and the mounting surface to ensure proper contact.
- Place the wheel back onto the hub and hand-tighten the lug nuts as much as possible.
- Using a torque wrench, tighten the lug nuts in a star pattern. This helps distribute the torque evenly.
- Refer to the lug nut torque specifications chart above and set your torque wrench accordingly.
- Tighten each lug nut to the specified torque value.
- Once all lug nuts are torqued, lower the vehicle using the jack.
- Using the lug wrench, give each lug nut a final check to ensure they are properly tightened.
Importance of Proper Lug Nut Torque
Properly torqued lug nuts are essential for the safety and performance of your vehicle. If lug nuts are not tightened to the recommended torque, several issues may arise. Under-torqued lug nuts can lead to wheel vibrations, which can cause discomfort while driving and potentially damage the wheel studs. On the other hand, over-torqued lug nuts can result in stripped threads or even cause the wheel to separate from the vehicle while in motion. Therefore, it is crucial to follow the manufacturer’s recommended lug nut torque specifications.
Conclusion
When it comes to maintaining the safety and performance of your 2018 GMC Canyon, paying attention to lug nut torque is essential. By following the recommended torque specifications and properly torquing the lug nuts, you can ensure a secure and stable connection between the wheels and the vehicle. Always refer to the lug nut torque chart provided by the manufacturer and follow the step-by-step process to achieve the correct torque. Safe travels!