2007 Nissan Altima Lug Nut Torque: Safety & Specifications

2007 Nissan Altima Lug Nut Torque Specifications

Why Lug Nut Torque Matters

Properly torquing the lug nuts on your 2007 Nissan Altima is crucial for the safety and performance of your vehicle. Insufficient torque can lead to loose wheels, which can cause vibrations, uneven tire wear, and even the risk of a wheel detachment. On the other hand, over-tightening the lug nuts can damage the wheel studs or the wheel itself. Therefore, it is essential to follow the manufacturer’s recommended torque specifications when installing or removing the lug nuts.

Lug Nut Torque Specifications for the 2007 Nissan Altima

To ensure the correct torque is applied to the lug nuts of your 2007 Nissan Altima, refer to the following chart for the specific torque values in lb-ft and Nm:

Wheel Size Lug Nut Torque (lb-ft) Lug Nut Torque (Nm)
15-inch 80-100 lb-ft 108-135 Nm
16-inch 80-100 lb-ft 108-135 Nm
17-inch 80-100 lb-ft 108-135 Nm
18-inch 80-100 lb-ft 108-135 Nm

Steps to Properly Torque the Lug Nuts

To ensure the lug nuts are torqued correctly on your 2007 Nissan Altima, follow these steps:

  1. Start by parking your vehicle on a flat and level surface.
  2. Engage the parking brake to prevent the vehicle from rolling.
  3. Locate the lug wrench and the jack provided with your Altima.
  4. Using the lug wrench, loosen each lug nut by turning them counterclockwise. Do not remove them completely at this stage.
  5. Position the jack under the appropriate jacking point of your vehicle. Refer to the owner’s manual for the correct location.
  6. Slowly raise the vehicle using the jack until the wheel you want to work on is off the ground.
  7. Now, remove the loosened lug nuts and take off the wheel.
  8. Clean the wheel hub and the mounting surface to ensure proper contact.
  9. Place the wheel back onto the hub and hand-tighten the lug nuts in a crisscross pattern.
  10. Using a torque wrench, tighten the lug nuts to the specified torque value according to the wheel size.
  11. Repeat the process for each wheel, ensuring that the lug nuts are torqued correctly.
  12. Lower the vehicle using the jack and remove the jack from under the car.
  13. Finally, using the lug wrench, give each lug nut a final check to ensure they are tightened securely.

Importance of Regularly Checking Lug Nut Torque

After driving your 2007 Nissan Altima for a few miles, it is advisable to recheck the lug nut torque. This is because the initial tightening and settling of the wheel can cause a slight loss of torque. By periodically checking the lug nut torque, you can ensure the wheels remain properly secured, providing a safe and comfortable driving experience.


Properly torquing the lug nuts on your 2007 Nissan Altima is essential for your safety on the road. By following the manufacturer’s recommended torque specifications and using the correct procedures, you can maintain the integrity of your wheels and enjoy a smooth and worry-free driving experience. Remember to periodically check the lug nut torque to ensure your wheels are always properly secured.

Leave a Reply