2018 Dodge Charger Lug Nut Torque Guide

2018 Dodge Charger Lug Nut Torque Specifications

Why Lug Nut Torque Matters

Properly torquing the lug nuts on your 2018 Dodge Charger is crucial for the safety and performance of your vehicle. Lug nuts that are too loose can result in wheel wobbling or even detachment, while lug nuts that are overtightened can cause damage to the wheel studs or threads. To ensure a secure and safe fit, it is important to follow the recommended lug nut torque specifications.

Recommended Torque Specifications

The following table provides the recommended lug nut torque specifications for the 2018 Dodge Charger:

Wheel Size Torque Specifications (lb-ft/Nm)
17-inch 110-120 lb-ft / 149-163 Nm
18-inch 110-120 lb-ft / 149-163 Nm
19-inch 110-120 lb-ft / 149-163 Nm
20-inch 110-120 lb-ft / 149-163 Nm

Steps to Properly Torque Lug Nuts

To ensure the lug nuts are torqued correctly, follow these steps:

  1. Start by ensuring your vehicle is on a level surface and the parking brake is engaged.
  2. Using a lug wrench or a torque wrench, loosen each lug nut on the wheel in a diagonal pattern (e.g., top left, bottom right, top right, bottom left).
  3. Once all the lug nuts are loose, raise the vehicle using a jack and secure it with jack stands.
  4. Remove the lug nuts and the wheel from the vehicle.
  5. Clean the wheel hub and the mounting surface to remove any dirt or debris.
  6. Place the wheel back onto the wheel hub and hand-tighten the lug nuts in a star pattern.
  7. Using a torque wrench, tighten each lug nut to the recommended torque specification in a star pattern.
  8. Double-check the torque on each lug nut to ensure they are all properly tightened.
  9. Lower the vehicle from the jack stands and remove the jack.
  10. Finally, recheck the lug nut torque after driving a short distance to ensure they have not loosened.

Final Thoughts

Properly torquing the lug nuts on your 2018 Dodge Charger is essential for your safety and the longevity of your vehicle. By following the recommended torque specifications and using the correct tightening sequence, you can ensure a secure fit and avoid any potential issues on the road. Remember to always double-check the torque after installation and periodically inspect your lug nuts to ensure they remain properly tightened.

Leave a Reply