2020 Subaru Crosstrek Lug Nut Torque: A Comprehensive Guide
Why is Lug Nut Torque Important?
- Proper lug nut torque is crucial for the safety and performance of your vehicle.
- Insufficient torque can lead to loose wheels, which can cause accidents or damage to your Subaru Crosstrek.
- Excessive torque can result in stripped threads or even damage to the wheel studs.
Recommended Lug Nut Torque for 2020 Subaru Crosstrek
When it comes to the lug nut torque specifications for the 2020 Subaru Crosstrek, it’s important to follow the manufacturer’s recommendations. Here is a detailed chart providing the torque values in both lb-ft (pound-feet) and Nm (Newton meters):
| Wheel Size | Lug Nut Torque (lb-ft) | Lug Nut Torque (Nm) |
|---|---|---|
| 16-inch | 66-81 lb-ft | 90-110 Nm |
| 17-inch | 66-81 lb-ft | 90-110 Nm |
| 18-inch | 66-81 lb-ft | 90-110 Nm |
Steps to Properly Torque Lug Nuts on Your Subaru Crosstrek
- Start by ensuring that your Subaru Crosstrek is parked on a level surface and the parking brake is engaged.
- Using a lug wrench or a torque wrench, loosen the lug nuts on the wheel you want to remove. Do not remove them completely at this stage.
- Place a jack under the appropriate jacking point of your Crosstrek and raise the wheel off the ground. Make sure to follow the instructions in your owner’s manual for proper jacking procedures.
- Once the wheel is off the ground, remove the lug nuts completely and carefully take off the wheel.
- Clean the wheel hub and the mounting surface to ensure proper contact and prevent any debris from interfering with the lug nut torque.
- Place the spare wheel or the new wheel onto the hub, aligning the holes with the wheel studs.
- Hand-tighten the lug nuts in a star pattern to ensure even tightening.
- Using a torque wrench, tighten the lug nuts to the recommended torque specification for your specific wheel size (refer to the chart above).
- Double-check the lug nuts to ensure they are properly tightened and secure.
- Lower your Crosstrek using the jack and remove the jack from under the vehicle.
- Finally, using a torque wrench, recheck the lug nut torque after driving approximately 50 miles to ensure they haven’t loosened.
Additional Tips for Lug Nut Torque
- Always use a torque wrench to ensure accurate torque application. Avoid using impact wrenches, as they can easily over-torque the lug nuts.
- Ensure that the torque wrench is properly calibrated before use.
- Refer to your owner’s manual or consult a professional if you have any doubts or questions regarding lug nut torque specifications.
- Regularly inspect your lug nuts for any signs of damage or wear, and replace them if necessary.
- When purchasing new wheels or tires, ensure they are compatible with your Subaru Crosstrek and follow the manufacturer’s recommendations for lug nut torque.
Conclusion
Proper lug nut torque is essential for the safety and performance of your 2020 Subaru Crosstrek. By following the recommended torque specifications and using the correct procedures, you can ensure that your wheels are securely fastened. Remember to periodically check the lug nut torque and inspect for any signs of damage or wear. Safe travels!