Mazda Bongo Wheel Nut Torque: Safety First

Mazda Bongo Wheel Nut Torque: Proper Tightening for Safety

Why Wheel Nut Torque Matters

  • Proper wheel nut torque is crucial for the safety and performance of your Mazda Bongo.
  • Insufficient torque can lead to loose wheel nuts, causing vibrations, poor handling, and even the risk of wheel detachment.
  • On the other hand, excessive torque can damage the wheel studs, leading to costly repairs.

Recommended Torque Settings

Here are the recommended wheel nut torque settings for Mazda Bongo, expressed in both pound-feet (lb-ft) and Newton meters (Nm):

Wheel Size Torque Setting (lb-ft) Torque Setting (Nm)
12-inch 65-79 lb-ft 88-107 Nm
13-inch 65-79 lb-ft 88-107 Nm
14-inch 65-79 lb-ft 88-107 Nm
15-inch 65-79 lb-ft 88-107 Nm

Proper Wheel Nut Torque Procedure

  1. Ensure your Mazda Bongo is parked on a level surface and engage the parking brake.
  2. Loosen the wheel nuts using a lug wrench or a suitable socket and breaker bar.
  3. Jack up the vehicle using a reliable jack and secure it with jack stands.
  4. Remove the loosened wheel nuts and take off the wheel.
  5. Clean the wheel studs and the mounting surface on the hub to remove any dirt or debris.
  6. Place the wheel onto the hub, aligning the holes with the wheel studs.
  7. Hand-tighten the wheel nuts in a star pattern to ensure even seating.
  8. Using a torque wrench, tighten the wheel nuts to the recommended torque setting specified for your Mazda Bongo’s wheel size.
  9. Repeat the torque tightening process for all the remaining wheels.
  10. Lower the vehicle from the jack stands and remove the stands.
  11. Using the lug wrench or socket, give the wheel nuts a final check to ensure they are properly tightened.

Additional Tips

  • Always refer to your Mazda Bongo owner’s manual for specific torque settings and procedures.
  • Use a calibrated torque wrench to ensure accurate torque measurement.
  • Check the wheel nut torque periodically, especially after driving for a few miles, to ensure they remain properly tightened.
  • If you’re unsure about the torque settings or lack the necessary tools, it’s best to consult a professional mechanic.


Proper wheel nut torque is essential for the safety and reliability of your Mazda Bongo. By following the recommended torque settings and tightening procedures, you can ensure that your wheels are securely fastened, minimizing the risk of accidents or damage. Take the time to perform this simple maintenance task, and enjoy a smooth and worry-free driving experience.

Leave a Reply