Toyota 4Runner Lug Nut Torque Specs

Toyota 4Runner Lug Nut Torque Specs for 2019

Why Lug Nut Torque Matters

Properly torquing the lug nuts on your Toyota 4Runner is essential for the safety and performance of your vehicle. If the lug nuts are not tightened to the correct specifications, it can lead to wheel vibrations, uneven tire wear, and even the possibility of the wheels coming loose while driving. To avoid these potential issues, it is important to follow the recommended lug nut torque specifications provided by Toyota.

Lug Nut Torque Specifications

To ensure the correct torque is applied to the lug nuts of your 2019 Toyota 4Runner, refer to the following table for the specific torque values in both pound-feet (lb-ft) and Newton meters (Nm):

Wheel Size Lug Nut Torque (lb-ft) Lug Nut Torque (Nm)
16-inch 76-83 lb-ft 103-113 Nm
17-inch 76-83 lb-ft 103-113 Nm
20-inch 76-83 lb-ft 103-113 Nm

How to Properly Torque Lug Nuts

To ensure the lug nuts are tightened correctly, follow these steps:

  1. Using a lug wrench or torque wrench, loosen the lug nuts on the wheel by turning them counterclockwise.
  2. Once the lug nuts are loosened, raise the vehicle using a jack and secure it with jack stands.
  3. Remove the loosened lug nuts and take off the wheel.
  4. Clean the wheel hub and the mounting surface to remove any dirt or debris.
  5. Place the wheel back onto the wheel hub, aligning the lug nut holes.
  6. Hand-tighten the lug nuts in a star pattern to ensure even tightening.
  7. Using a torque wrench, tighten the lug nuts to the specified torque value in the table above.
  8. Double-check the lug nuts to ensure they are properly tightened.
  9. Lower the vehicle and remove the jack stands.
  10. Finally, using the lug wrench or torque wrench, give each lug nut a final check to ensure they are still properly tightened.

Importance of Regular Lug Nut Inspections

While it is crucial to torque the lug nuts properly during wheel installation, it is also important to regularly inspect them for any signs of loosening or damage. It is recommended to visually inspect the lug nuts and check their torque values every 5,000 miles or during routine maintenance intervals. This will help ensure your wheels remain securely attached and prevent any potential issues on the road.


Properly torquing the lug nuts on your 2019 Toyota 4Runner is essential for the safety and performance of your vehicle. By following the recommended torque specifications and using the correct torque wrench, you can ensure that your wheels are securely fastened. Regular inspections and maintenance will further enhance the safety and longevity of your vehicle’s wheels. Remember to always refer to the specific torque values provided by Toyota for your 4Runner model and wheel size.

Leave a Reply